Vol 21, No 8 (2021) / Poro

BVRI Photometric Observations, Light Curve Solutions and Orbital Period Analysis of BF Pav

Atila Poro, Fahri Alicavus, Eduardo Fernández-Lajús, Fatemeh Davoudi, PegahSadat MirshafieKhozani, Mark Blackford, Edwin Budding, Behjat Zarei Jalalabadi, Jabar Rahimi, Farzaneh Ahangarani Farahani

Abstract

A new ephemeris, period change analysis and light curve modeling of the W UMa-type eclipsing binary BF Pav are presented in this study. Light curves of the system taken in BVRI filters from two observatories, in Australia and Argentina, were modeled using the Wilson-Devinney code. The results of this analysis demonstrate that BF Pav is a contact binary system with a photometric mass ratio q = 1.460 ± 0.014, a fillout factor f = 12.5%, an inclination of 87.97 ± 0.45 deg and a cold spot on the secondary component. By applying the distance modulus formula, the distance of BF Pav was calculated to be d = 268 ± 18 pc which is in good agreement with the Gaia EDR3 distance. We obtain an orbital period increase at a rate of 0.142 s century−1 due to a quadratic trend in the O − C diagram. Also, an alternative sudden period jump probably occurred which could be interpreted as a rapid mass transfer from the lower mass star to its companion of about ∆M = 2.45×10−6 \(M_{\odot}\). Furthermore, there is an oscillatory behavior with a period of 18.3 ± 0.3 yr. Since BF Pav does not seem to have significant magnetic activity, this behavior could be interpreted as the light-time effect caused by an undetected third body in this system. In this case, the probability for the third body to be a low mass star with M ≥ 0.075 \(M_{\odot}\) or a brown dwarf is 5.4% and 94.6% respectively. If we assume \(i’=90^{\circ}\), a3 = 8.04 ± 0.33 AU. The mass of the secondary component was also determined following two different methods which result close to each other.

 

Keywords


techniques: photometric — binaries: eclipsing — stars: individual (BF Pav)

Full Text:

PDF


DOI: https://doi.org/10.1088/1674-4527/21/8/203

Refbacks

  • There are currently no refbacks.